Installation : | ||
Rough Guide To: Connecting Kill Switches & Lights | ||
Numerous connections and switching options are possible - 5 examples are illustrated below for reference; | ||
![]() |
||
Use of a Y splitter cable to connect controllable lights and a 3 channel kill switch (see note 5 above) | ||
![]() |
||
Use of a Y splitter cable to connect switched lights fed from from rx battery pack | ||
![]() |
||
Use of a Y splitter cable to connect a 2 channel kill switch & servo, with the aux channel (3) used for lights or other secondary device. | ||
![]() |
||
Use of a Y splitter cable to connect a 2 channel kill switch & servo, with switched lights fed from a secondary Y splitter from rx pack | ||
![]() |
||
Use of a 4-way Y splitter cable to connect several devices off the battery/4th channel. Lights are controllable via the controller unit. Kill switch / servos each have dedicated channels. | ||